進口電動高壓調節閥W4F6CP

點擊圖片查看原圖

品牌：	德國沃德WODE
口徑：	DN15-DN300
材質：	A105、F304、F316
壓力：	0-75Mpa
單價：	面議
起訂：	1 臺
供貨總量：	100 臺
發貨期限：	自買家付款之日起 3 天內發貨
所在地：	北京
有效期至：	長期有效
最后更新：	2022-02-24 09:52
瀏覽次數：	1885

公司基本資料信息

詳細說明

進口電動高壓調節閥W4F6CP

electric pressure control valve W4F6CP

品牌：德國沃德WODE

Brand: Germany WODE

關鍵詞：進口電動超高壓調節閥，進口電動超高壓差調節閥，進口電廠高溫高壓調節閥，進口75Mpa調節閥，進口Class4500LB調節閥

一、概述Overview

W4F6CP型進口電動高壓調節閥又稱抗氣蝕、低噪聲、高壓差調節閥、是德國沃德工程技術人員為滿足50-600MW火力發電機組配套而開發的新型調節閥，該系列產品經過多次的改進，不繼完善，具有新穎性和先進性。

W4F6CP Type import electric pressure control valve, also known as anti-cavitation and low noise, high-pressure differential regulating valve, which is the development of engineering and technical personnel of GER WODE Company To meet the 50-600MW thermal power generating units supporting.The series has a new and advanced after many improvements and improve.

二、用途Use

安裝在電廠鍋爐高壓差管道上作流量、壓力調節用

Installed in power plant boiler pipe high-pressure differential for regulating flow or pressure.

三、結構特征Structure

1、本系列產品采用完合拆裝式結構，操作力距小，閥腔內件（包括閥座、

閥芯、節流組件、密封件等）均可從并閥腔取出，維護保養十分方便，閥體不需從管道上割下，可長期使用。

This series of products together with complete disassembly structure, operation torque is small, the valve chamber pieces (including the seat,

Valve, throttle assemblies, seals, etc.) can be removed from the chamber and the valve, maintenance is very convenient, valve body do not have to be cut from the pipeline,can be long-term use

2、閥芯為柱塞體平衡式結構，操作力距小，調節靈敏高。

Spool is balanced plunger body structure, operating torque, the adjustment of high sensitivity.

3、節流組件由多孔板集流式節流環yu套筒式節流套組成，且配以均流罩，

因此具有小流量高壓差無氣蝕、大流量、調節性能好，流體排出梳流無噪音的綜合特性，完全滿足了高壓差等苛刻工況的要求，有效地實現了高溫、高壓差流體的流量調節控制，可調性好，調節精度高。

Throttling component from the porous flow restrictor plate set ring set with integral throttle sleeve, and supported by both flow hood, therefore, no pressure differential with low flow cavitation, the flow, regulated performance, drain fluid flow without noise comb, fully meet the harsh conditions of high pressure and poor requirements, effective implementation of the high temperature and pressure differential control of fluid flow control, adjustable, good regulation and high precision.

4、節流環可在閥門工作行程的55%之內，實現多級減壓節流

Cutting ring can be achieved in multi-stage vacuum throttle valve work within 55% of stroke.

5、閥芯和閥座密封面堆焊司鈦萊硬質合金，抗沖刷、耐蝕。

Core and valve seat sealing surface is welded titanium Levin Secretary carbide, anti-erosion and corrosion resistance.

四、閥體Body

組成部件Components

1、閥體2、齒形墊片3、閥塞4、閥芯組件（含閥座、迷宮節流件、壓籠）5、齒形墊片6、閥桿7、閥蓋8、壓圈9、螺母10、螺柱11、下填料12、中填料13、上填料14、隔環15、壓套16、壓板17、螺母18、螺栓

1、Body 2、Profile gasket 3、Plug 4、Valve assembly (including valve seat, cutting pieces of the maze, pressure cage) 5、Profile gasket 6、Stem, 7、valve cover, 8、the pressure ring 9、Nut, 10、stud, 11、under the filler, 12、the filler, 13、the filler 14、ring, 15、pressure sets, 16、clips, 17、nuts, 18、bolts